Onboard Bluetooth v2.0 (HC-05)

The bluetooth module provides a bridge between the MYOSA hardware and the mobile application. The sensor values are transmitted from the hardware to mobile app periodically via bluetooth.

Technical Specifications:

  • Easy configuration through AT commands
  • Status and Pairing LEDsSupport Master & Slave Mode
  • Serial communications: 9600-115200bpsSPP (Serial Port Profile) support
  • Support UART,USB,PCM interface to host systemEncrypted connection
  • Frequency: 2.4~2.524 GHzBluetooth core V2.0 compliant
  • Built-in Chip antenna
Plug and Play WiFi (ESP8266-12E)

WiFi facilitates wireless communication and data transfer among MYOSA motherboard and sensors, within the sensors, and over the cloud storage. The sensor values can be transmitted among all these mediums as needed. The WiFi module is in the form of a daughter board which can simple be plugged into the MYOSA motherboard.

Technical Specifications:

  • WiFi Protocols: 802.11 b/g/n
  • Frequency Range: 2.4-2.5GHz
  • Operating Voltage: 3.0~3.6VOperating
  • Current: Average value: 80mA
  • Peripheral Bus: UART/SDIO/SPI/I2C/I2S/IR Remote Control and  GPIO/PWM
  • WiFi mode: station/softAP/SoftAP+station
  • Security: WPA/WPA2
  • Network Protocols: IPv4, TCP/UDP/HTTP/FTP